How to Android 7 Nougat Update

Update Nexus-7 2012 to Android 7.1.2 r33 Tilapia Nougat

The second era Nexus-7 is a smaller than normal tablet PC co-created by Google and Asus that runs the Android working framework. It is the third tablet in the Google. A group of Android purchaser gadgets advertised by Google and worked by a unique gear maker accomplice. The device was launched in 2013. Four days sooner than the initially booked date because of early discharges from different retailers. The tablet was the principal gadget to transport form 4.3 of Android.

The second cycle of the 7 in (180 mm) tablet, codenamed “Razor” has different overhauls from the past age, including a 1.5 GHz quad-center Snapdragon S4 Pro processor, 2 GB of memory, a 1920×1200 pixel show (323 pixels for each inch; 127 ppm), double cameras (1.2 MP front, 5 MP raise), stereo speakers, worked in inductive Qi remote charging, and a SlimPort (by means of miniaturized scale USB connector) prepared to do full top-notch video yield to an outside show.


About Tilapia Nougat for Nexus-7:

  1. F2FS support.
  2. Substratum OMS support.
  3. Integrated superuser.
  4. Backup tool support.
  5. Reboot menu.
  6. Additional Quick Settings tiles (ADB over WiFi, Caffeine, Immersive mode).
  7. SystemUI tweaks – QS pull with one finger, double tap to sleep on a status bar.
  8. Navbar Tuner.
  9. Pixel-like theme and launcher, from nAOSProm-7.1.1

Pre-requisites for updating Nexus-7:

  • Tilapia 7.1.2 r33 ROM guide is only for the Nexus 7 tablet.
  • You need to install ClockworkMod recovery on your tablet.
  • You must have a Nandroid Backup to protect your data from losing.
  • The process will clear your phone data whereas, you may proceed at your own risk.

Process for updating Nexus-7:

  1. Download Tilapia 7.1.2 r33 ROM and Google Apps for Nexus 7 to your computer.
  2. Using the USB cable connect Nexus 7 USB memory on your computer.
  3. Then Copy/Paste the 7.1.2 r33 ROM zip and Google Apps zip files to your SD card. Assure that the files are in boot mode.
  4. Switch off your device and disconnect the USB cable.
  5. For entering the bootloader mode you need to press and hold the Volume Up + Volume Down and Power buttons.
  6. Now you need to follow the instructions on your screen. Choose BOOTLOADER and then go to RECOVERY.
  7. When in ClockworkMod Recovery, perform a full data wipe by selecting “wipe data/factory reset”. With Power button select everything while in the Recovery Mode.
  8. Go for a cache wipe by selecting “wipe cache partition”.
  9. It is recommended to perform a wipe of your Dalvik cache as well but it’s optional. It will help you with the boot loops. In CWM recovery, go to ‘advanced’ and then choose “wipe Dalvik cache”.
  10. After this go back to main recovery screen and choose “install zip from SD card”.
  11. Then “choose zip from sd card”. By volume keys, move to the 7.1.2 r33ROM zip file that was copied to the SD card choose it with a Power button.
  12. You need to confirm the installation to begin the process.
  13. After this proceed to the option “Go Back” and reboot the tablet by choosing“reboot system now” from the recovery menu.
  14. All set it’s Done!

Leave a Comment