Android Android ONE How to Update

Guide to Install Android 6.0 Marshmallow on Android one (Karbonn Sparkle V)




Karbonn Sparkle V Update

Now Android one devices are receiving the Android 6.0 Marshmallow OTA update in Philippines and India. We also published the Android 6.0 Marshmallow update tutorials for Nexus devices. And today we will guide you how to update Karbonn Sparkle V to Android 6.0 Marshmallow OTA update. To Check the OTA update on your Android one phone, go to the Settings => About Phone => System update. If there is no update available then you need to wait for some more days if you can’t wait then you can flash the OTA update manually. If you have Karbon Sparkle V and want to update then follow the below guidelines.


Disclaimer: This guide is for Karbonn Sparkle V, don’t try it on any other device, also we GuideBeats are not held responsible for any damage caused by following this guide, try it on your own risk!



  • Backup your important data on KARBONN SPARKLE V.
  • Phone battery charged at least 50%.
  • USB cable to connect Karbonn Sparkle V with PC.


Step No 1. Download the Marshmallow OTA Update zip file: Link

Step No 2. Now connect you phone to PC via USB cable.

Step No 3. Move the zip file on your phone internal memory.

Step No 4: Now disconnect your Phone from PC.

Step No 5. Now boot your Android device into Stock Recovery mode. To boot into recovery, Turn off your device, Press & hold volume up + power buttons until the phone gets into the bootloader menu, once in that menu, just press the volume up button to move the selection to recovery and then press the power button. The phone will boot into recovery mode and you see a red Android bot with an exclamation mark, keep in mind you are holding the power button for at least 3 seconds when you see the screen.
Step No 6. Once you are in the stock recovery mode, choose “install update from sd card”.

Step No 7. Now Select the OTA file you saved already on your phone. Use the volume buttons to navigate and power button to confirm the flashing process.

Step No 8. Now the flashing process will start on your Android one device and this will take few minutes.

Step No 9. Once the installation is done, your phone will automatically reboot or head back to reboot your device.

Cheers! Now your Android one phone is running on the Android 6.0 Marshmallow.

Leave a Comment